Shock Mount (Black Aluminum) for the Blue Yeti Microphone by Auphonix

Shock Mount by Auphonix

With the ‘fixed mount cradle’ for the Blue Yeti microphone having its limitations such as being bulky and often requiring to be propped up to get the positioning right (well mostly) I have been on the lookout for a decent shock mount for the Blue Yeti, but it has been a long time come and after many months finally a decent (£25) and affordable shock mount for the Blue Yeti found at http://amzn.eu/6bd69jp .

Many issues exist for a decent shockmount purchase:

  1. Blue’s own offering is costly (and reportedly fraught with issues if loose clamps – especially for the price)
  2. The Yeti does have a standard fixing, so there are not many offerings (some bespoke offerings that have been flash in the pan’s)
  3. The Yeti is one heavy beast and there are numerous reports of any point that require tightening not holding out (see point 1)
  4. There are a reported batch of Blue Yeti’s that do have the 3/8″thread overcut by a 1/16″ (causing poor fitting to any mount, and not any issue with mounts themselves)

Now I purchased my Blue Yeti for a very handsome price of approx. £65 and there was no way I was ever going to purchase a mount in excess of that so point 1 is out of the question. I toyed with the idea of creating my own (point 2) and even drew up plans but never got round to it! Something specific needed for the yeti due to its non-standard fitting and needing to carry it’s weight (point 3) was also a concern for any attached boom (see later). The only solutions for an overcut fixing was either and new Yeti or as I have read on the web to use plumbing tape (PTFE) to ‘take up the slack’ and not have the Yeti drop off, thankfully I did not need this solutions.

The Auphonix offering was getting great reviews (a cheaper plastic and a reasonable priced aluminium offering were available) but I hesitated and lucked out on the silver aluminium @ £30, then a rather elegant black version showed up for £5 less! a result – and most Booms are black anyway. So now an accompanying boom was required to be purchased – I was conscious of the weight of the Yeti but on Amazon was the recommendation for under £12 the Tencro Professional Microphone Boom for Blue Yeti ( http://amzn.eu/g4CTVSO ), specifically having the key point of being heavy duty designed for supporting almost all microphones up to 4.4 pounds / 2KG.

Both are now fitted and I found that mounting my Yeti above the mount, rather than below, suited my rig better as I will be swinging my mic up and out the way often – kids can be too inquisitive! The difference between the original fixed stand against the dampening properties of the boom & shock-mount are excellent and given my setup prior to this purchase noticeably picked-up ‘shocks & knocks’ and caused me to be extra careful when recording to minimise disruption the cost @ less than £40 is a great solution and one that I cannot recommend myself if you want the best from your original audio recording with your Blue Yeti.

 

Advertisements